Table of Contents
Advertisement
Choosing the Ethernet Port
-1- From the Main Setup screen select Data Port to
-2- Choose 10BT.
Setting up AuroraPresto - Software
Version 2.80 or Later
Tip
To check the current software version, press
details see
on page 3-41.
-1- Select Download from the System Setup menu to
-2- Choose OK to select Download Mode
Notes
• When you select Download
automatically set to Bridged. If
previously set to Routed, then the LAN IP Address and
Mask Address are displayed. You can accept these or
enter new addresses.
• The setting are only temporary when in Download
mode.
Issue 7 - 05/02
display the Data Port Setup screen.
Checking the Current Setup of AuroraPresto
display the following screen.
or
CANCEL to leave the Download screen and return to
the current settings.
The default is CANCEL.
Setting up AuroraPresto
AuroraPresto
is
AuroraPresto
+ 5. For
was
3-47
Advertisement
Table of Contents
