Section 5 - Atm Layer Tests; Section 5-Atm Layer Tests; Setting Up The Data Port Connection - Agilent Technologies AuroraPresto User Manual

Section
ATM Layer Tests
5
5
AuroraPresto
encapsulated ATM packets.
You can configure
10 Base T (or optional) ATM 25 data port.
DTE
10 Base T
Ethernet
Data Port
ATM 25
AuroraPresto
(optional)
replacing ADSL
Data Port
DTE
When 10 Base T is selected as the data port, Ethernet frames
are processed into AAL-5 encapsulated ATM packets for
transport over the ADSL layer. For Higher level statistics for
mapped and unmapped VCs see
Test Results
increased, level of processing involved.
When ATM 25 is selected as the data port, the native ATM
cells are transmitted via
A top level view of the statistics is provided for this simple
MAC bridging operation.

Setting up the Data Port Connection

Setting up the ATM Layer Test Data Connection
This sets up
Mode. See the
-1- From the Main Setup screen select Data Port to
Issue 7 - 05/02
can generate, transmit and receive AAL-5
AuroraPresto
ATM over ADSL
modem
(ATU-R)
on page 4-53. These statistics reflect the
AuroraPresto
diagram
display the Data Port Setup screen.

Section 5 - ATM Layer Tests

to accept data via the
ATU-C
ATU-C CO
ATU-C
DSLAM
Displaying ATM Layer
AuroraPresto
onto the ASDL layer.
to simulate Golden Modem
on page 4-10.
ATM
4-51