AuroraPresto—User Guide
-4- Choose F1 Next to display the next statistics screen.
Far End Statistics
Near End Errors
This displays the number of Near End segment error counts
that have occurred on the local segment between
AuroraPresto
The errors displayed are:
-5- Choose F1 Next to display the next statistics screen
Far End Errors
-6- Choose F1 Next to display the next statistics screen.
4-46
Rx SNM—The Received Signal-to-Noise Margin
•
in dBs. This is updated every second. If the link
is not active '0' is displayed.
Rx Gain—The Receiver Gain in dBs. This is
•
updated when the line is activated.
Atten.—The Loop Attenuation. This is updated
•
every second. If the link is not active '0' is
displayed.
Rx Gain—The Receiver Gain in dBs. This is
•
updated when the line is activated.
Atten.—The Loop Attenuation. This is updated
•
every second. If the link is not active '0' is
displayed.
and the next segment terminator in the link.
CRC—Displays the Cyclic Redundancy Check
•
errors detected during the session.
LOSW—Displays the Loss of Sync Word defect
•
errors during the detected during the session.
OR
press F3 Clear to set the counts to zero.
CRC—Displays the Cyclic Redundancy Check
•
errors detected during the session.
481801