Table of Contents
Advertisement
AuroraPresto—User Guide
Note
If you have not assigned a VC to the PPP Port, the following
screen is displayed. See
-3- Press ESC to continue.
Note
Only VCs that are enabled are displayed. To enable a VC,
press F1 VC Config to display the VC Config screen. See
Setting up VPIs (Virtual Path Identifiers) and VCIs (Virtual
Channel Identifiers)
Setting Up the PPP Mode
-1- From the PPP Setup menu choose Type and press
-2- Choose Client or Server.
Note
If you select Client Mode (PPPoE Cli or PPPoA Cli), the
authentication is automatically set to None to indicate that
AuroraPresto
Setting up the PPP Session Options
-1- From the PPP Setup menu choose Init Mode and
3-28
on page 4-52.
ENTER to display the following screen.
is not an authenticator.
press ENTER to display the following screen.
Setting up the IP Port
on page 3-17.
481801
Advertisement
Table of Contents
