Table of Contents
Advertisement
Choosing the Ethernet Port
-1- From the Select Test Mode screen, select Modem
-2- Select Data Connect and press F1 10BT.
Setting up AuroraPresto - Software
Version 1.07 or Later
Tip
To check the current software version, press
details see
on page 3-41.
Setting up the IP Address
-1- From the Select Test Mode screen, press F4 Setup.
-2- Enter an IP Address (Src), Default Gateway and
-3- Enter a Subnet Mask (Msk).
-4- If you have the PPP Option, select Origin and choose
-5- Press ESC to accept the settings and exit the
Issue 7 - 05/02
Tests.
Checking the Current Setup of AuroraPresto
Select IP Address Setup to display the options:
(DGW).
Enter 000.000.000.000 if you do not know the
Default Gateway.
Enter 255.255.000.000 if you do not know the
Subnet Mask.
Specify.
IP Address Setup screen.
Setting up AuroraPresto
+ 5. For
3-45
Advertisement
Table of Contents
