Near End Alarms
-7- Choose F1 Next to display the next statistics screen
Far End Alarms
-8- Choose F1 Next to display the next statistics screen.
Seg Errors
Segmented Errors. This displays the number of local errors
detected by a downstream segment terminator.
Issue 7 - 05/02
LowSNRS—Low Signal-to-Noise Ratio Seconds
•
LOSS—Loss of Signal Seconds
•
LOSSWS—Loss of SyncWord Seconds
•
LPRS—Loss of Power Seconds
•
ES—Displays The number of Errored Seconds.
•
An errored second is any second during which
one or more bit errors are received.
SES—Severely Errored Seconds
•
US—Unavailable Seconds
•
OR
press F3 Clear to set the counts to zero.
LOSSWS—Loss of SyncWord Seconds
•
LPRS—Loss of Power Seconds
•
ES—Displays The number of Errored Seconds.
•
An errored second is any second during which
one or more bit errors are received.
SES—Severely Errored Seconds
•
US—Unavailable Seconds
•
SEGA—Displays the current status of SEGment
•
Anomaly errors detected during the session.
When a segmented terminator encounters a CRC
error the segmented terminator sets the SEGA bit
in the regenerated frame to indicate that the data
in the regenerated frame may be unreliable.
Section 4 - DSL Layer Tests
4-47