Table of Contents
Advertisement
AuroraPresto—User Guide
Setting up the Tracer
See
Setting up the Modem for ADSL Tests
Setting up the Threshold
-1- From the Modem Setup screen choose Thresholds
-2- Enter a value between 15 and 40.
4-44
Data Rate—Enter a number between 192 and
•
AuroraPresto
2312.
enter to the nearest valid data rate as defined in
G.991.2.
Data Rate is only available if you choose Fixed
Rate Mode.
Min Rate kbps—Enter a minimum bit rate
•
value between 192 and 2312 (SYM only).
Max Rate kbps—Enter a maximum bit rate
•
value between 192 and 2312. The maximum bit
rate must be greater than the minimum bit rate
(SYM only).
Startup Mgn—Enter a value between 0 and 15.
•
Use to set up the Startup margin required when
bit rate is negotiated during startup. Enter a
value between 0 and 15dB. The default is 0dB.
At start up AP negotiates the attainable bit rate.
Pwr BackOff—Use to enable or disable the
•
Power Back Off option. When enabled, it gives
6dB power backoff if the estimated power loss is
6dB or less in accordance with G991.2.
and press ENTER twice to display the following
screen.
will adjust the value you
on page 3-11.
481801
Advertisement
Table of Contents
