Setting Up Auroraexchange For Aurorapresto - Agilent Technologies AuroraPresto User Manual

AuroraPresto—User Guide
-3- To leave Download mode and return to your previous
Note
After you have transferred new software to
you must return

Setting up AuroraExchange for AuroraPresto

-1- Choose Start, select Programs and choose
-2- From the Product list, select Presto and then click on
-3- Make sure that the IP Address displayed in
Note
If
AuroraExchange
warning is displayed. Follow the instructions displayed and
repeat step 3 above.
-4- Select the Task you want to perform and then click on
3-48
settings, press ESC.
to the previous settings.
AuroraPresto
AuroraExchange
OR
double-click on the
desktop.
The Welcome to Aurora
displayed.
Next.
The Step 1: Connect to the Presto dialog is
displayed.
Aurora
Exchange
IP Address, then click on Next.
AuroraPresto's
If the IP addresses are correct, the Step 2: Choose
the Task dialog is displayed.
cannot connect to
Next.
Upgrade—install new software on
•
AuroraPresto
Choose this option to transfer any new options
you have purchased, for example, PPP or
F5 OAM; or updated software, for example,
version 3.00 to
Upgrading AuroraPresto
See
AuroraPresto
reboots and resets
to the Factory Defaults.
from the Aurora folder
AuroraExchange
Exchange
Tester IP Address is the same as
AuroraPresto
AuroraPresto.
AuroraPresto
icon on your
dialog is
, a
on page 3-49.
481801