Table of Contents
Advertisement
AuroraPresto—User Guide
Note
The following options are displayed according to how the
mode option is set up.
Port
LAN Address
WAN Address
Framing
NAT
DHCP
Setting up the IP Mode
-1- From the IP Setup screen press ENTER.
-2- Choose Bridged Mode for Layer 2 operation.
-3- Press ENTER to accept the settings.
-4- Press ESC to exit the IP Setup screen.
3-16
Use to set up the port over which the
routed protocol (or PPP) applies.
Enter the IP Address that
AuroraPresto
Enter the IP Address that
AuroraPresto
Use to set up the IP (Internet Protocol)
Frame type, Ethernet encapsulation
method, IP operation mode and IP
Header compression.
Use to set up the Network Address
Translation settings.
Use to set up the Dynamic Host
Configuration Protocol settings.
The following screen is displayed.
Choose Routed Mode for Layer 3 operation.
Choose PPP when
generator.
will use on the LAN.
will use on the WAN.
AuroraPresto
is operating as a PPP
481801
Advertisement
Table of Contents
