G.SHDSL DSL Statistics
Note
During training, the STU-R and the STU-C exchange
operational information.
To display the G.SHDSL Statistics:
-1- From the Select Test Mode select Manual Tests to
-2- Choose DSL Layer. The following screen is displayed.
-3- Choose DSL Statistics to display the G.SHDSL
Near End Statistics
Issue 7 - 05/02
display the Select Operation screen.
Statistics screens. For example:
Bit Rate—The Bit Rate in kbps when running in
•
fixed bit rate mode. If the link is not yet active
'0' is displayed.
Tx Pwr—The Transmit Power in dBs. If the link
•
is not active '0' is displayed.
Rx SNR—The Received Signal-to-Noise Ratio in
•
dBs. This is updated every second. If the link is
not active '0' is displayed.
Section 4 - DSL Layer Tests
4-45