Switching The Backlight On And Off; Removing & Replacing The Belt Hook - Agilent Technologies AuroraPresto User Manual

Table of Contents

Advertisement

AuroraPresto—User Guide
Tip
If you have made the screen slightly too dark or too light,
you can reverse the direction of the contrast change by
repeating the above steps.

Switching the Backlight On and Off

-1- Press
Note
When
switches off after a set time if no keys have been pressed.
You can change the length of time that passes before the
backlight goes off—see
on page 3-7.
Removing & Replacing the Belt Hook
AuroraPresto
battery pack cover at the back of the unit. You can use the
hook to carry the unit or to hang it up for hands-free
operation.
Removing the belt hook
Warning
Disconnect all cables before removing the battery cover.
-1- Remove the battery pack cover. To do this:
2-8
+ 2.
AuroraPresto
is using battery power, the backlight
has a removable belt hook, attached to the
Loosen the screw by turning it anticlockwise
using a coin or screwdriver.
When the screw is released, it pops up. Slide the
cover upwards to remove.
Changing the Basic Configuration
481801

Advertisement

Table of Contents
loading

Table of Contents