Table of Contents
Advertisement
AuroraPresto—User Guide
Running a TDR Test
You can use the TDR Test to locate and investigate faults on
the line or faults indicated by the DMM test. See
Tests
-1- From the Physical Test screen select TDR Tests and
-2- To start the test, press F1 Start from the TDR Tests
You can move through the display using the keypad. See
TDR Key Sequence
4-28
on page 4-21.
press ENTER to display the following screen:
screen
OR
press ESC from the TDR Setup screen.
A screen similar to the following is displayed.
If you want to stop the test press F1 Stop to return to
the previous screen.
The results of the test are displayed as a graph.
table on page 4-30.
DMM
481801
Advertisement
Table of Contents
