-3- Press ENTER to display the following screen.
ADSL
Performing DSL Layer Tests
-1- From the Select Test Mode select Manual Tests to
Issue 7 - 05/02
DSL —is displayed when
•
connected to a modem or DSLAM or Layer 1 is
not active.
Seeking—
AuroraPresto
•
modem to synchronise to.
Training—is displayed when
•
found a modem and is waiting to make a
connection to the modem. If training is
unsuccessful,
automatically after 15 seconds if you have set
Training to Auto in Modem Setup. See
up the Modem for ADSL Tests
Showtime (DataMode for G.SHDSL). See
•
G.SHDSL Tests
AuroraPresto
modem or DSLAM and the DSL layer is active.
AuroraPresto
is now ready for testing.
display the Select Operation screen.
Section 4 - DSL Layer Tests
AuroraPresto
is searching for a
AuroraPresto
AuroraPresto
attempts to retrain
on page 4-42 is displayed when
has successfully connected to the
G.SHDSL
is not
has
Setting
on page 3-11.
4-35