Table of Contents
Advertisement
AuroraPresto—User Guide
-2- To confirm, choose OK
Note
When you return to the factory defaults, you reset all the
settings back to their original values—that is, the way they
were when you first received the tester, except the Hot Key
Profiles and any stored results.
To delete a Hot Key Profile see
page 3-6. To remove stored results see
from Memory
3-36
OR
choose CANCEL to close the confirmation window
without changing any settings.
If you choose OK the following screen is displayed
briefly and confirms that
reconfigured.
AuroraPresto
resets and loads the factory defaults.
This takes a few seconds.
on page 5-6.
AuroraPresto
has been
Deleting a Hot Key
Clearing Sessions
on
481801
Advertisement
Table of Contents
