Table of Contents
Advertisement
TDR Key
Sequence
F2
F4
Load Coil Tests
Warning
When connecting to the line, especially when using
crocodile clips, special care must be taken as high voltages
may be present on the line and there may be a danger of
electrocution.
Caution: TDR/DMM Tests
When performing Capacitance and Load Coil tests make
sure that voltage is NOT present on the line, if a voltage is
present on the line you may damage
The Current test is intended for low DC current
measurement only. It is protected by a 400mA fuse.
The TDR/DMM module has protection devices fitted at
manufacture that cannot be reset by the user. If the
protection devices are activated
returned to Agilent Technologies for repair.
Your
option because your organisation has not bought it.
For details contact your Agilent Technologies
representative.
Issue 7 - 05/02
Key
Name
F2
F4
Window
AuroraPresto
may not have the Load Coil Tests
Section 3 - Physical Layer Tests
Action
Increases the Range, Gain
or Width
Next- Selects the Range,
Gain or Width
Switches between the Graph
Results screen and the TDR
Setup screen
AuroraPresto
AuroraPresto
.
must be
4-31
Advertisement
Table of Contents
