Connecting To The Interfaces; Xdsl Connections - Agilent Technologies AuroraPresto User Manual

AuroraPresto—User Guide

Connecting to the Interfaces

Warning: Connecting to the line
Remember that high voltages may be present on
telecommunication lines.
AuroraPresto
of the unit. For information about the connectors and
details of their corresponding cables see
connectors panel
To connect AuroraPresto to an interface
-1- Plug the interface cable into the appropriate
-2- Connect the other end of the cable to the equipment

xDSL Connections

The following diagrams show all the points, on the xDSL
2-wire connections, where you can connect and test using
AuroraPresto
for more information.
Terminate
Mode
DTE
10BaseT
ATM 25
Key
xTU-C xDSL Terminating Unit
(Central Office)
xTU-R xDSL Terminating
(Remote)
DTE Data Terminal
Equipment
DSLAM Digital Subscriber Loop
Access Multiplexer
ISP Internet Service Provider
RAS Remote Access Server
2-4
's interface connectors are located on the base
on page 1-18.
AuroraPresto
connector on
you want to test.
Testing with AuroraPresto
. See
Golden Modem Terminate
Mode Mode
Modem
(xTU-R)
Unit
.
Terminate
Mode
xTU-C
xDSL
Line
xTU-C CO
xTU-C
DSLAM
The interface
on page 4-1
ATM
RAS
ISP
481801