Table of Contents
Advertisement
AuroraPresto—User Guide
-2- Select Start Session. The following screen is
-3- Enter a name (up to eight characters).
Tip
If you need information on how to use this screen, see
Entering Alphanumeric Information
-4- To save the name and begin capturing, press OK.
Note
When you start a new session, all the current results will be
cleared, unless you have saved them first. See
Active Session
While Capturing is in Progress
AuroraPresto
As
the end of an open session file stored in the memory.
When the memory is full,
memory full message and stops saving until you delete an
older session, or displays a wrap message and begins
overwriting the oldest data in the memory.
5-4
displayed.
You cannot use the same name as a session that is
already stored.
AuroraPresto
begins capturing and returns to the
Select Test Mode screen. The letter S is displayed in
the top right-hand side of the screen to indicate that
you have started a session.
on page 5-5.
captures session results they are added to
on page 2-16.
AuroraPresto
either displays a
Saving an
481801
Advertisement
Table of Contents
