Operation Error
(1) There are no operation errors associated with the OUT C
Program Example
(1) The following program turns Y30 ON after X0 has gone ON 10 times, and resets the counter
when X1 goes ON.
[Ladder Mode]
(2) The following program sets the value for C10 at 10 when X0 goes ON, and at 20 when X1
goes ON.
[Ladder Mode]
[List Mode]
Step
Instruction
Device
instruction.
[List Mode]
Step
Instruction
Stores 10 at D0 when X0 goes ON.
Stores 20 at D0 when X1 goes ON.
C10 executes counting using the data
stored in D0 as the set value.
Y30 goes ON at the count-up of C10.
OUT C
Device
5-27
1
2
3
4
5
6
7
8