Mitsubishi MELSEC Q Series Programming Manual page 86

Category
TYPERD
Module model
name read
TYPERDP
Trace set TRACE
Trace rset TRACER
Writing data to the
SP.FWRITE
designated file
Reading data
from designated SP.FREAD
file
Writing data to
S.DEVST
standard ROM
S.DEVLD
Reading data from
standard ROM
SP.DEVLD
Loading program
PLOADP
from memory
Unloading
program from PUNLOADP
program memory
Load
+ PSWAPP
Unload
RBMOV
High-speed
block transfer of
file register
RBMOVP
User message UMSG
2-58
Table 2.35 Other Instructions (Continued)
Symbol
TYPERD D
n
TYPERDP D
n
TRACE
TRACER
SP.FWRITE S0 D0 S1 S2 D1
U0
SP.FREAD S0 D0 S1 S2 D1
U0
SP.DEVST n1 n2
S D
S.DEVLD n1 n2
D
SP.DEVLD n1 n2
D
PLOADP S D
PUNLOADP S D
PSWAPP S1 S2 D
RBMOV S D
n
n
RBMOVP S D
S
UMSG
Processing Details
• This instruction reads the module
information stored in the area starting from
the I/O number specified by "n", and stores
it in the area starting from the device
specified by (D).
• Stores the trace data set with peripheral
device by the number of times set when
SM800, SM801 and SM802 turn on, to
the sampling trace file.
• Resets the data set the TRACE
instruction.
• Writes data to the designated file.
• Reads data from the designated file.
• Writes data to the device data storage file in
the standard ROM.
• Reads data from the device data storage file
in the standard ROM.
• Transfers the program stored in a
memory card or standard memory (other
than drive 0) to drive 0 and places the
program in standby status.
• Deletes the standby program stored in
standard memory (drive 0).
• Deletes standby program stored in
standard memory (drive 0) designated by
(S1). Then, transfers the program stored
in a memory card or standard memory
(other than drive 0) designated by (S2) to
drive 0 and places it in standby status.
• Transfers n points of 16-bit data from the
device designated by (S) to the devices
of n points starting from the one
designated by (D).
• Displays the specified character strings
on the display unit as a user message.
Execution
Condition
3 - 7-408
1 - 7-413
1 - 7-413
11 - 7-415
11 - 7-427
9 - 7-439
8 - 7-441
3 - 7-443
3 - 7-446
4 - 7-448
4 - 7-451
2 - 7-456