Mitsubishi MELSEC Q Series Programming Manual page 205

Operation Error
(1) There are no operation errors associated with the
Program Example
(1) The following program compares the data at X0 to XF with the data at D3, and turns Y33 ON
if the data is identical.
[Ladder Mode]
(2) The following program compares BIN value K100 to the data at D3, and establishes
continuity if the data in D3 is something other than 100.
[Ladder Mode]
(3) The following program compares the BIN value 100 with the data at D3, and establishes
continuity if the D3 data is less than 100.
[Ladder Mode]
(4) The following program compares the data in D0 and D3, and if the data in D0 is equal to or
less than the data in D3, establishes continuity.
[Ladder Mode]
, , , , , or
[List Mode]
Instruction
Step
[List Mode]
Instruction
Step
[List Mode]
Instruction
Step
[List Mode]
Instruction
Step
=,<>,>,<=,<,>=
instruction.
Device
Device
Device
Device
6-3
1
2
3
4
4
6
7
8