Front Panel Display; Figure 4 - Typical Wqar Display (Run Control Feature In Use); Figure 5 - Typical Wqar Display (Run Control Feature Not In Use); Figure 6 - Wqar Display (Data Out Of Sync) - Teledyne WIRELESS GROUNDLINK WQAR User Manual

Front Panel Display

The blue backlit front panel display has two lines with 16 characters each and
shows the operational status of the unit. Figures 4 and 5 show normal post-
boot-up status when Run-Control is in use and when not in use.
RUN DISABLED
R_On
Figure 4 – Typical WQAR Display (Run Control Feature in Use)
R_On
Figure 5 – Typical WQAR Display (Run Control Feature not in Use)
Figures 6 shows a display example of flight data is coming in when it is out-of-
sync (NoSync). When the WQAR is configured properly, the NoSync condition
is temporary and, after a few seconds, will display what is shown in Figure 7.
During this time, data is recorded but it will appear invalid during analysis.
RawIn:NoSync
R_On
Use and disclosure shall be in accordance with the proprietary information notice and DCS on page i.
UG2243800-4XX
:
:
:
Figure 6 – WQAR Display (Data out of Sync)
P a g e
:IOff
:IOff
:IOff
May 28, 2019
| 18