Change Your Password; Saving Your Configuration; Switch Lockout - ZyXEL Communications MES3500-24S User Manual

Table 5 Navigation Panel Links (continued)
LINK
Configure Clone
Neighbor Table

4.3.1 Change Your Password

After you log in for the first time, it is recommended you change the default administrator password.
Click Management > Access Control > Logins to display the next screen.
Figure 20 Change Administrator Login Password

4.4 Saving Your Configuration

When you are done modifying the settings in a screen, click Apply to save your changes back to the
run-time memory. Settings in the run-time memory are lost when the Switch's power is turned off.
Click the Save link in the upper right hand corner of the web configurator to save your configuration to
nonvolatile memory. Nonvolatile memory refers to the Switch's storage that remains even if the Switch's
power is turned off.
Note: Use the Save link when you are done with a configuration session.

4.5 Switch Lockout

You could block yourself (and all others) from using in-band-management (managing through the data
ports) if you do one of the following:
Chapter 4 The Web Configurator
DESCRIPTION
This link takes you to a screen where you can copy attributes of one port to (an)other port(s).
This link takes you to a screen where you can view the IPv6 neighbor table which includes
index, interface, neighbor address, MAC address, status and type.
MES3500-24S/MGS3520 Series User's Guide
40