Table of Contents
Advertisement
Use put to transfer the configuration file from the computer. The configuration file on the
system is named config-0.
Figure 219 Example: Upload the Configuration File config-0
ftp> put xxx.dat config-0
Quit FTP.
Figure 220 Example: Close FTP Client
ftp> quit
Wait for the update to finish. The system restarts automatically.
53.4 Firmware File Upgrade
Use the following procedure to upload firmware to the IES-1248.
Use an FTP client to connect to the IES-1248.
Figure 221 Example: Use an FTP Client to Connect to the IES-1248
C:\> ftp <IES-1248 IP address>
Type your user name and press [ENTER].
User (172.23.15.86:(none)): admin
Enter the management password (1234 by default).
Figure 222 Example: Enter the Management Password
Password: 1234
230 Logged in
Transfer the firmware file to the IES-1248. The firmware file on your computer (that you want
to put onto the IES-1248 is named firmware.bin. The internal firmware file on the IES-
1248 is named ras.
Figure 223 Example: Transfer the Firmware File
ftp> put firmware.bin ras
Quit FTP.
Figure 224 Example: Close FTP Client
ftp> quit
Wait for the update to finish. The IES-1248 restarts automatically.
IES-1248-71/73 User's Guide
Chapter 53 Firmware and Configuration File Maintenance
361
Advertisement
Table of Contents
Troubleshooting
