Adsl Command Examples; Adsl Show Command - ZyXEL Communications AAM1212 User Manual

AAM1212 User's Guide
Table 60 ADSL Commands (continued)
COMMAND
pmm

27.3 ADSL Command Examples

These are the commonly used commands that belong to the ADSL group of commands.

27.3.1 ADSL Show Command

Syntax:
adsl show [portlist]
where
[portlist]
This command shows the activation status, ADSL mode, maximum upstream and downstream
rate settings, profile and name of each ADSL port.
The following example displays information on ADSL port 5.
198
enable <portlist>
disable <portlist>
show <portlist>
enable <portlist>
disable <portlist>
show <portlist>
= You can specify a single ADSL port <1>, all ADSL ports <*>
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
DESCRIPTION
Turns on Seamless Rate Adaptation
(SRA) ADSL2+ on the specified
port(s).
Turns off SRA ADSL2+ on the
specified port(s).
Displays the SRA ADSL2+ setting for
the specified port(s).
Turns on the Power ManageMent
feature on the specified port(s).
Turns off the Power ManageMent
feature on the specified port(s).
Displays the Power ManageMent
feature setting for the specified port(s).
Chapter 27 ADSL Commands