026-400 Exceed The Number Of Connectin Of Usb Host Fail Rap; 026-700 Ldap Protocol Max Error Rap - Xerox workcentre 5335 series Service Manual

026-400 Exceed the Number of Connection of USB Host
Fail RAP
Info. Failure because the USB Host Port maximum connection has been exceeded. The num-
ber of machines that are connected to the USB Host Port of this machine has exceeded the
maximum permissible number of connections.
Procedure
Disconnect some of the machines that are connected to this USB Host Port and ensure
that the number of connected machines are below the maximum permissible number of
connections.
If the USB Host connected machine is still not operating correctly after the above error
has been resolved, turn the power OFF then ON.
Initial Issue
WorkCentre 5335 Family Service Documentation

026-700 LDAP Protocol MAX Error RAP

Unspecified LDAP protocol is detected in Address Book operation. LDAP Server is using pro-
tocol unsupported with this machine. his fault is usually caused by server setting or customer's
mis-operation.
Procedure
The server uses an undefined LDAP protocol that is not supported by the machine.
Perform the following in sequence.
1. Get the procedures for reproducing an error according to the operation that was
performed when the error occurred.
2. Check whether the Controller ROM is the latest version. If not, upgrade it to the
latest.
This is caused by mistakes in server settings or client operation. Contact the Support
Department and do not replace the ESS-PWB.
07/2011
2-431
BUS Updated 12/2011
Status Indicator RAPs
026-400, 026-700