Table of Contents
Advertisement
024-959 Tray 1 Size Mismatch RAP
BSD-ON:
BSD 7.1 - Tray 1 Paper Size Sensing
The paper size in Tray 1 and the paper size specified for printing are different.
Initial Actions
Load the correct size paper in Tray 1.
Procedure
•
If problem persists go to the
071-212
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - update if required
Initial Issue
WorkCentre 5335 Family Service Documentation
RAP.
(GP
16)
BUS Updated 12/2011
024-960 Tray 2 Size Mismatch RAP
BSD-ON:
BSD 7.2 - Tray 2 Paper Size Sensing
The paper size in Tray 2 and the paper size specified for printing are different.
Initial Actions
Load the correct size paper in Tray 2.
Procedure
•
If problem persists go to the
072-212
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - update if required
07/2011
2-419
RAP.
(GP
16)
Status Indicator RAPs
024-959, 024-960
Advertisement
Table of Contents
