REP 5.19 Platen Belt
Parts List on
PL 20.10
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Remove Front Cover
(PL
20.1).
2.
Remove Document Transport
(REP
3.
Remove Platen Belt
(Figure
1).
3
Remove Platen
Belt
Figure 1 Removing Platen Belt
Initial issue
DC 3535/2240/1632, WC M24
WARNING
5.17).
1
Loosen screws (2)
2
Move shaft support in
direction of arrow
Replacement
1.
Lock shaft support by matching hole with frame's detent
Detent/Hole
Figure 2 Locking shaft support
2.
Make sure that both sides of Platen Belt are correctly set in pulley
09/03
4-39
(Figure
2).
(Figure
3).
Repairs and Adjustments
REP 5.19