Remove V-Ribbed Belt - Toyota 2GR-FE Manual

EM–6
EM
2GR-FE ENGINE MECHANICAL – DRIVE BELT
REMOVAL
1. REMOVE FRONT WHEEL RH
2. REMOVE FRONT FENDER APRON SEAL RH
3. REMOVE V-BANK COVER SUB-ASSEMBLY (See
page EM-23)
4.

REMOVE V-RIBBED BELT

(a) Using SST, release the belt tension by turning the
belt tensioner counterclockwise, and remove the V-
ribbed belt from the belt tensioner.
SST
SST
A129622E01
(b) While turning the belt tensioner counterclockwise,
align with its holes, and then insert the 5 mm bi-
hexagon wrench into the holes to fix the V-ribbed
belt tensioner.
A095070
09249-63010