Toyota 2GR-FE Manual page 181

2GR-FE ENGINE CONTROL SYSTEM – SFI SYSTEM
Menu Screen:
DTC P0630 Set
[EXIT]
(g) Enter the following menus: DIAGNOSIS /
ENHANCED OBD ll / VIN.
Select VIN READ
VIN Previously Stored
17-digit VIN
displayed
[EXIT]
To Menu Screen
3. WRITE VIN
(a) The flowchart of the VIN writing process is shown.
This process allows the VIN to be input into the
ECM. If the ECM is changed, or the VINs do not
match, the VIN can be registered, or overwritten in
the ECM by following this procedure.
(b) Write VIN using the intelligent tester.
(c) Check the vehicle's VIN.
(d) Connect the intelligent tester to the DLC3.
(e) Turn the ignition switch on (IG).
(f) Turn the tester on.
ES–25
ES
VIN Not Stored
[EXIT]
A103812E03