Disconnect Engine Wire/Transmission Control Cable Assembly - Toyota 2GR-FE Manual

2GR-FE ENGINE MECHANICAL – ENGINE ASSEMBLY
34. DISCONNECT ENGINE WIRE
(a) Disconnect the engine wire from the engine room
A132975
(b) Remove the 2 bolts and 2 clamps from the body.
A132976
(c) Remove the bolt and clamp from the bracket.
A132981
35. DISCONNECT TRANSMISSION CONTROL CABLE
ASSEMBLY
(a) Remove the clip and nut, and separate the cable
A132973
junction block.
(1) Remove the nut and separate the wire harness.
(2) Using a screwdriver, unlock the engine room J/
B. Pull the engine room J/B upward.
(3) Disconnect the engine wire connectors.
from the transaxle.
EM–27
EM