Toyota 2GR-FE Manual page 745

FU–32
FU
2GR-FE FUEL – FUEL PUMP
7.
A129487
INSTALLATION
1.
A129481
2.
Mark
A129480E01
INSTALL NO. 2 FUEL SUCTION SUPPORT
(a) Install the No. 2 fuel suction support.
INSTALL FUEL SUCTION TUBE ASSEMBLY WITH
PUMP AND GAUGE
(a) Install a new gasket to the fuel suction tube.
(b) Install the fuel suction tube.
NOTICE:
• Do not damage the fuel pump filter.
• Be careful that the arm of the sender gauge
does not bend.
INSTALL FUEL TANK VENT TUBE SET PLATE
(a) Align the mark of the set plate with the fuel suction
tube.
(b) Install the set plate with the 8 bolts.
Torque: 5.9 N*m (60 kgf*cm, 52 in.*lbf)