Toyota 2GR-FE Manual page 770

2GR-FE COOLING – COOLANT
Radiator Cap
COOLANT
ON-VEHICLE INSPECTION
1. REMOVE FRONT WHEEL OPENING EXTENSION
PAD RH
2. REMOVE FRONT WHEEL OPENING EXTENSION
PAD LH
3. REMOVE ENGINE UNDER COVER RH
4. REMOVE ENGINE UNDER COVER LH
5. REMOVE V-BANK COVER SUB-ASSEMBLY (See
page EM-23)
6. REMOVE COOL AIR INTAKE DUCT SEAL (See page
EM-23)
7. DRAIN ENGINE COOLANT
NOTICE:
Do not remove the radiator cap sub-assembly while
the engine and radiator are still hot. Pressurized, hot
engine coolant and steam may be released and
cause serious burns.
(a) Remove the radiator cap sub-assembly from the
radiator assembly.
(b) Loosen the radiator drain cock plug and 2 cylinder
block drain cock plugs, then drain the coolant.
HINT:
Collect the coolant in a container and dispose of it
according to the regulations in your area.
Cylinder Block Drain Cock Plug
Cylinder Block Drain Cock Plug
Radiator Drain Cock Plug
CO–5
CO
A128117E02