CH–14
CH
2GR-FE CHARGING – GENERATOR
26. REMOVE GENERATOR ASSEMBLY
(a) Remove the terminal cap.
(b) Remove the nut and disconnect the wire harness
from terminal B.
(c) Disconnect the generator connector from the
generator assembly.
(d) Disconnect the connector from the compressor and
magnetic clutch.
(e) Disconnect the 2 wire harness clamps.
A133865
(f)
Remove the 2 bolts.
A133866
(g) Remove the bolt from the cylinder block.
(h) Disconnect the wire harness clamp and remove the
generator assembly.
A133867
(i)
Remove the bolt and wire harness clamp stay.
A128066
(j)
Remove the bolt and bracket.
A135391