Toyota 2GR-FE Manual page 861

2GR-FE CHARGING – GENERATOR
(e) Install the 2 bolts.
Torque: 43 N*m (438 kgf*cm, 32 ft.*lbf)
A133866
(f) Connect the generator connector to the generator
assembly.
(g) Install the generator wire with the nut.
Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf)
(h) Install the terminal cap.
(i) Connect the 2 wire harness clamps.
(j) Connect the magnetic clutch connector to the
compressor and magnetic clutch.
2. INSTALL V-RIBBED BELT (See page EM-7)
A133865
3. INSTALL RADIATOR ASSEMBLY (See page CO-31)
4. INSTALL FAN SHROUD (See page CO-32)
5. INSTALL RADIATOR SUPPORT UPPER (See page
CO-32)
6. CONNECT NO. 1 OIL COOLER OUTLET TUBE (See
page CO-33)
7. CONNECT NO. 1 OIL COOLER INLET TUBE (See
page CO-33)
8. CONNECT RADIATOR OUTLET HOSE (See page
33)
9. CONNECT RADIATOR INLET HOSE (See page
33)
10. CONNECT RADIATOR RESERVE TANK HOSE (See
page CO-34)
11. INSTALL FRONT BUMPER ENERGY ABSORBER
(See page ET-10)
12. INSTALL FRONT BUMPER ASSEMBLY (w/o Fog
Light) (See page ET-13)
13. INSTALL FRONT BUMPER ASSEMBLY (w/ Fog Light)
(See page ET-14)
14. INSTALL NO. 1 AIR CLEANER INLET (See page
49)
15. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See
page ES-506)
16. INSTALL AIR CLEANER INLET ASSEMBLY (See page
EM-50)
CH–23
CO-
CO-
EM-
CH