Install No 2 Manifold Stay/Oil Level Gauge Guide Sub-Assembly; Install Intake Manifold - Toyota 2GR-FE Manual

No. 2
No. 1
Front
2GR-FE ENGINE MECHANICAL – ENGINE ASSEMBLY
15. INSTALL NO. 2 MANIFOLD STAY
(a) Install the No. 2 manifold stay with the 2 bolts.
A129639
16. INSTALL OIL LEVEL GAUGE GUIDE SUB-
ASSEMBLY
(a) Install 2 new O-rings to the oil level gauge guide.
(b) Apply a light coat of engine oil to the O-rings.
(c) Push in the oil level gauge guide end into the guide
(d) Install the oil level gauge guide No. 1 with the bolt.
(e) Install the oil level gauge guide No. 2 with the bolt.
A129638E01
(f)
17. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH
(a) Install a new gasket as shown in the illustration.
A129650E01
(b) Install the exhaust manifold sub-assembly RH with
A129637

18. INSTALL INTAKE MANIFOLD

(a) Set a new gasket on each cylinder head.
(b) Set the intake manifold on the cylinder heads.
A134933
Torque: 34 N*m (347 kgf*cm, 25 ft.*lbf)
hole.
Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
Install the oil level gauge.
the 6 nuts.
Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
NOTICE:
• Align the port holes of the gasket and
cylinder head.
• Make sure that the gasket is installed in the
correct direction.
EM–41
EM