Install Drive Plate And Ring Gear Sub-Assembly - Toyota 2GR-FE Manual

2GR-FE ENGINE MECHANICAL – ENGINE REAR OIL SEAL
SST
Adhesive
1
5
3
8
2
2. INSTALL DRIVE PLATE AND RING GEAR SUB-
ASSEMBLY
(a) Using SST, hold the crankshaft.
A129631E01
(b) Apply adhesive to 2 or 3 threads of the mounting
P000601E04
7
4
3. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
6
HINT:
See page AX-214.
A132243E01
SST 09213-70011 (09213-70020), 09330-00021
bolt end.
Adhesive:
Part No. 08833-00070, THREE BOND 1324 or
equivalent
(1) Install the front spacer, drive plate and rear
spacer on the crankshaft.
(2) Install and tighten the 8 mounting bolts
uniformly in several steps.
Torque: 83 N*m (850 kgf*cm, 61 ft.*lbf)
EM–13
EM