Toyota 2GR-FE Manual page 543

2
CHECK WHETHER DTC OUTPUT RECURS
NEXT
END
2GR-FE ENGINE CONTROL SYSTEM – SFI SYSTEM
(a) Connect the intelligent tester to the DLC3.
(b) Turn the engine switch on.
(c) Clear the DTCs (See page ES-45).
(d) Start the engine and wait for 10 minutes or more.
(e) On the tester, enter the following menu items:
DIAGNOSIS / ENHANCED OBD II / DTC / INFO /
PENDING CODEs.
(f) If no pending DTC is displayed, the repair has been
successfully completed.
ES–387
ES