Toyota 2GR-FE Manual page 495

Table of Contents

Advertisement

DTC
P2119
SYSTEM DESCRIPTION
The Electronic Throttle Control System (ETCS) is composed of the throttle actuator, Throttle Position (TP)
sensor, Accelerator Pedal Position (APP) sensor, and ECM. The ECM operates the throttle actuator to
regulate the throttle valve in response to driver inputs. The TP sensor detects the opening angle of the
throttle valve, and provides the ECM with feedback so that the throttle valve can be appropriately
controlled by the ECM.
DTC No.
Throttle valve opening angle continues to vary greatly
P2119
from target opening angle (1 trip detection logic)
MONITOR DESCRIPTION
The ECM determines the actual opening angle of the throttle valve from the TP sensor signal. The actual
opening angle is compared to the target opening angle commanded by the ECM. If the difference
between these two values is outside the standard range, the ECM interprets this as a malfunction in the
ETCS. The ECM then illuminates the MIL and sets the DTC.
If the malfunction is not repaired successfully, the DTC is set when the accelerator pedal is quickly
released (to close the throttle valve) after the engine speed reaches 5,000 rpm by fully depressing the
accelerator pedal (fully open the throttle valve).
MONITOR STRATEGY
Related DTCs
Required Sensors/Components (Main)
Required Sensors/Components (Sub)
Frequency of Operation
Duration
MIL Operation
Sequence of Operation
TYPICAL ENABLING CONDITIONS
Monitor runs whenever following DTCs are not present
System guard*
*System guard set when following conditions are met:
Throttle actuator
Throttle actuator duty calculation
TP sensor
Throttle actuator current-cut operation
Throttle actuator power supply
Throttle actuator
TYPICAL MALFUNCTION THRESHOLDS
Either of following conditions A or B is met
A. Commanded closed TP - current closed TP
B. Commanded open TP - current open TP
2GR-FE ENGINE CONTROL SYSTEM – SFI SYSTEM
Throttle Actuator Control Throttle Body Range /
Performance
DTC Detection Condition
ETCS
ECM
P2119: ETCS malfunction
Throttle actuator
-
Continuous
1 second
Immediate
None
None
ON
-
ON
Executing
Fail determined
Not executing
4 V or more
Fail determined
-
0.3 V or more for 1 second
0.3 V or more for 0.6 seconds
ES–339
Trouble Area
ES

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents