Toyota 2GR-FE Manual page 797

CO–32
Tank
Radiator Support Lower
CO
Radiator Support Cushion
2GR-FE COOLING – RADIATOR
5.
SST
A128143E03
Lock
Plate
O-Ring
A087096E02
INSTALLATION
1.
A133371E03
2.
A133371E02
3.
A135523
INSPECT FOR WATER LEAKS
(a) Plug the inlet and outlet pipes of the radiator with
SST.
SST 09230-01010
(b) Using the radiator cap tester, apply pressure to the
radiator.
Test pressure:
177 kPa (1.8 kgf/cm
(c) Submerge the radiator in water.
(d) Inspect for leaks.
HINT:
On radiators with resin tanks, there is clearance
between the tank and lock plate where a minute
amount of air will remain, giving the appearance of
an air leak when the radiator is submerged in water.
Therefore, before doing the water leak test, first
swish the radiator around in the water until all air
bubbles disappear.
INSTALL RADIATOR SUPPORT LOWER
(a) Install the 2 radiator support lowers to the radiator
assembly.
INSTALL RADIATOR SUPPORT CUSHION
(a) Install the 2 radiator support cushions to the radiator
assembly.
INSTALL RADIATOR ASSEMBLY
(a) Install the radiator to the body.
2
, 26 psi)