Toyota 2GR-FE Manual page 726

(b)
(a)
(c)
(a)
(d)
(e)
(e)
2GR-FE FUEL – FUEL INJECTOR
REMOVAL
1. DISCHARGE FUEL SYSTEM PRESSURE
HINT:
See page FU-1.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY
TERMINAL
3. DRAIN ENGINE COOLANT (See page CO-5)
4. REMOVE FRONT WIPER ARM AND BLADE
ASSEMBLY LH (See page WW-9)
5. REMOVE FRONT WIPER ARM AND BLADE
ASSEMBLY RH (See page WW-9)
6. REMOVE FRONT FENDER TO COWL SIDE SEAL LH
(See page WW-9)
7. REMOVE FRONT FENDER TO COWL SIDE SEAL RH
(See page WW-9)
8. REMOVE COWL TOP VENTILATOR LOUVER SUB-
ASSEMBLY (See page WW-10)
9. REMOVE WINDSHIELD WIPER MOTOR AND LINK
ASSEMBLY (See page WW-10)
10. REMOVE COWL TOP PANEL OUTER SUB-
ASSEMBLY (See page ES-481)
11. REMOVE V-BANK COVER SUB-ASSEMBLY (See
page EM-23)
12. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (See
page ES-503)
13. REMOVE INTAKE AIR SURGE TANK ASSEMBLY
(a) Disconnect the 2 water by-pass hoses from the
throttle with motor body assembly.
(b) Disconnect the vapor feed hose.
(c)
(c) Disconnect the throttle with motor body assembly
connector and clamp.
A129464E01
(d) Disconnect the No. 1 ventilation hose.
(e) Disconnect the union to check valve hose.
A129465E05
FU–13
FU