Toyota 2GR-FE Manual page 681

2GR-FE ENGINE CONTROL SYSTEM – IG2 RELAY
IG2 RELAY
INSPECTION
1. INSPECT IG2 RELAY
(a) Using an ohmmeter, measure the resistance
Tester Connection
B016200
3 - 5
3 - 5
according to the value(s) in the table below.
Standard resistance
Specified Condition
10 kΩ or higher
Below 1 Ω (Battery voltage applied
between terminals 1 and 2)
If the result is not as specified, replace the relay.
ES–513
ES