Toyota 2GR-FE Manual page 816

LH Bank:
RH Bank:
LH Bank:
RH Bank:
2GR-FE IGNITION – IGNITION COIL
9. REMOVE IGNITION COIL ASSEMBLY
(a) Disconnect the 6 ignition coil connectors.
(b) Remove the 6 bolts and 6 ignition coils.
A134966E01
INSTALLATION
1. INSTALL IGNITION COIL ASSEMBLY
(a) Install the 6 ignition coils with the 6 bolts.
Torque: 10 N*m (102 kgf*cm, 10 ft.*lbf)
(b) Connect the 6 ignition coil connectors.
A134966E01
2. INSTALL NO. 1 SURGE TANK STAY
(a) Install the No. 1 surge tank stay with the bolt.
Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
NOTICE:
Make sure that there is no oil on the bolt
threads.
A134967
IG–11
IG