Install Vane Pump Assembly/Engine Assembly With Transaxle - Toyota 2GR-FE Manual

EM–44
EM
B
B
A
D
C
D
2GR-FE ENGINE MECHANICAL – ENGINE ASSEMBLY
(c) Connect the connector and clamp.
A132990
(d) Connect the 2 clamps.
A132989
30. INSTALL VANE PUMP ASSEMBLY
(a) Install the vane pump with the 2 bolts.
(b) Install the pressure feed tube clamp bolt.
(c) Connect the power steering oil pressure switch
A138331
31. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE
B
(a) Set the engine assembly with transaxle on the
B
(b) Install the engine assembly to the vehicle.
(c) Install the frame side rail plates RH and LH with the
A
(d) Install the front suspension member brace rear RH
D
C
D
A129634E01
Torque: 43 N*m (438 kgf*cm, 32 ft.*lbf)
Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf)
connector.
engine lifter.
4 bolts and 2 nuts.
Torque: A
85 N*m (867 kgf*cm, 63 ft.*lbf)
B
32 N*m (329 kgf*cm, 24 ft.*lbf)
and LH with the 4 bolts and 2 nuts.
Torque: C
85 N*m (867 kgf*cm, 63 ft.*lbf)
D
32 N*m (329 kgf*cm, 24 ft.*lbf)