Toyota 2GR-FE Manual page 378

ES–222
14
CHECK VALVE TIMING
ES
OK
15
CHECK FUEL PRESSURE
OK
16
READ VALUE OF INTELLIGENT TESTER (COOLANT TEMP)
2GR-FE ENGINE CONTROL SYSTEM – SFI SYSTEM
(a) Remove the cylinder head covers.
(b) Turn the crankshaft pulley, and align its groove with the
(c) Check that the timing marks of the camshaft timing gears
Timing Mark
(d) Reinstall the cylinder head covers.
Timing Mark
NG
Timing Mark
Timing Mark
A135015E01
(a) Check the fuel pressure (high or low pressure).
Item
Fuel pressure
NG
(a) Connect the intelligent tester to the DLC3.
timing mark "0" of the timing chain cover.
are aligned with the timing marks of the bearing cap as
shown in the illustration.
If not, turn the crankshaft 1 revolution (360°) and align
the marks as above.
OK:
Timing marks on camshaft timing gears are aligned
as shown in illustration.
ADJUST VALVE TIMING
Standard
CHECK AND REPLACE FUEL SYSTEM
Standard Condition
2
147 kPa (1.5 kgf/cm , 21 psi)