Toyota 2GR-FE Manual page 742

Tape
(*1)
A129483E02
(*2)
(*1)
(*2)
A079495E05
A079496E01
A133536E01
O-Ring
A133534E02
2GR-FE FUEL – FUEL PUMP
4. REMOVE FUEL SUCTION PLATE SUB-ASSEMBLY
(a) Disconnect the fuel pump connector (
(b) Using a screwdriver with its tip wrapped with tape,
disengage the 4 snap claws from the claw holes,
and pull out the fuel suction plate.
NOTICE:
Do not damage the fuel suction support.
5. REMOVE FUEL PUMP HARNESS
(a) Disconnect the connector (
(b) Using a screwdriver, pry out the fuel pump harness
*
( 2).
6. REMOVE FUEL PUMP
(a) Pull out the fuel pump from the fuel filter.
7. REMOVE FUEL PRESSURE REGULATOR
ASSEMBLY
(a) Pull out the fuel pressure regulator from the fuel
filter.
(b) Remove the O-ring from the fuel pressure regulator.
FU–29
*
1).
*
1).
FU