Toyota 2GR-FE Manual page 793

CO–28
Stopper Bolt
Part A
Dimension B
0.2 to 0.3 mm
Claw
CO
Stopper Bolt
2GR-FE COOLING – RADIATOR
SST
Overhaul Handle
A104619E03
Tank
Lock Plate
SST
A128137E02
Tap
A128138E01
DISASSEMBLY
1. REMOVE DRAIN PLUG
(a) Remove the drain plug.
(b) Remove the O-ring.
2. REMOVE RADIATOR TANK UPPER
(a) Install the claw to the overhaul handle, inserting it in
the hole in part A as shown in the illustration.
SST 09230-01010 (09231-01010, 09231-01030)
(b) While gripping the handle, adjust the stopper bolt so
that dimension B is as shown in the illustration.
Dimension B:
0.2 to 0.3 mm (0.008 to 0.012 in.)
NOTICE:
If the stopper bolt is not adjusted, the claw may
be damaged.
(c) Using SST to release the caulking, grip the handle
until stopped by the stopper bolt.
SST 09230-01010 (09231-01010, 09231-01030)
(d) Lightly tap the bracket of the radiator (or radiator
hose inlet or outlet) with a soft-faced hammer and
remove the tank.
(e) Remove the O-ring.