Install No 2 Idler Pulley Sub-Assembly/Timing Gear Cover; Install V-Ribbed Belt Tensioner Assembly - Toyota 2GR-FE Manual

FR Side:
RR Side:
B
B
2GR-FE ENGINE MECHANICAL – ENGINE ASSEMBLY
8. INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY
(a) Install the No. 2 idler pulley sub-assembly and cover
A129645E01
9. INSTALL NO. 2 TIMING GEAR COVER
(a) Install the No. 2 timing gear cover with the 2 bolts.
A132987

10. INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

(a) Temporarily install the V-ribbed belt tensioner with
A
B
1
B
(b) Install the V-ribbed belt tensioner by tightening the
2
A129644E01
(c) Tighten the other bolts.
plate with the bolt.
Torque: 43 N*m (438 kgf*cm, 32 ft.*lbf)
Torque: 6.0 N*m (61 kgf*cm, 53 in.*lbf)
the 5 bolts.
HINT:
Each bolt length is as follows:
A: 70 mm (2.76 in.)
B: 33 mm (1.30 in.)
bolt 1 and bolt 2 in the order shown in the
illustration.
Torque: 43 N*m (438 kgf*cm, 32 ft.*lbf)
Torque: 43 N*m (438 kgf*cm, 32 ft.*lbf)
EM–39
EM