Toyota 2GR-FE Manual page 854

CH–16
CH
2GR-FE CHARGING – GENERATOR
2. REMOVE GENERATOR REAR END COVER
(a) Place the generator assembly on the clutch pulley.
A135197
(b) Remove the 3 nuts and generator rear end cover.
A128071
3. REMOVE GENERATOR TERMINAL INSULATOR
(a) Remove the terminal insulator from the generator
coil.
A128072
4. REMOVE GENERATOR BRUSH HOLDER ASSEMBLY
(a) Remove the 2 screws and brush holder from the
generator coil.
A128073
5. REMOVE GENERATOR COIL ASSEMBLY
(a) Remove the 4 bolts.
A128074