Toyota 2GR-FE Manual page 154

Table of Contents

Advertisement

RH Side:
LH Side:
Oil Pipe Union
Oil Pipe Union
Oil Pipe Union
Oil Pipe Union
2GR-FE ENGINE MECHANICAL – ENGINE UNIT
(b) Install the water drain cocks as shown in the
20°
12°
(c) Install the water drain cock plugs to the water drain
61. INSTALL NO. 1 OIL PIPE
(a) Make sure that there is no foreign matter on the
45°
15°
A135830E01
(b) Install the oil control valve filter LH to the oil pipe
(c) Install a new gasket and temporarily install the oil
(d) Tighten the oil pipe union (on the head cover side).
(e) Tighten the oil pipe union (on the cylinder head
A135726E01
62. INSTALL OIL PIPE
(a) Make sure that there is no foreign matter on the
(b) Install the oil control valve filter RH to the oil pipe
(c) Install a new gasket and temporarily install the oil
(A)
(d) Install the bolt (A) to the cylinder head.
(e) Tighten the oil pipe union (on the head cover side).
A134878E02
(f)
illustration.
Torque: 25 N*m (255 kgf*cm, 18 ft.*lbf)
NOTICE:
Do not rotate the drain cocks more than 1
revolution (360°) after tightening the drain cocks
with the specified torque.
cocks.
Torque: 13 N*m (130 kgf*cm, 9 ft.*lbf)
mesh of the oil control valve filter LH.
NOTICE:
Do not touch the mesh when installing the oil
control valve filter.
union. Install new gaskets and temporarily install the
oil pipe (on the head cover side).
pipe (on the cylinder head side) with the oil check
valve bolt.
Torque: 65 N*m (663 kgf*cm, 48 ft.*lbf)
side).
Torque: 65 N*m (663 kgf*cm, 48 ft.*lbf)
NOTICE:
If the link that connects the gaskets is broken,
remove the connecting link by using nippers or
similar tools.
mesh of the oil control valve filter RH.
NOTICE:
Do not touch the mesh when installing the oil
control valve filter.
union. Install new gaskets and temporarily install the
oil pipe (on the head cover side).
pipe (on the cylinder head side) with the oil check
valve bolt.
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
Torque: 65 N*m (663 kgf*cm, 48 ft.*lbf)
Tighten the oil pipe union (on the cylinder head
side).
Torque: 65 N*m (663 kgf*cm, 48 ft.*lbf)
EM–153
EM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents