Toyota 2GR-FE Manual page 97

EM–96
Depth
EM
Y
2GR-FE ENGINE MECHANICAL – ENGINE UNIT
14. INSPECT NO. 3 CHAIN TENSIONER ASSEMBLY
Depth
A106109E01
15. INSPECT CHAIN TENSIONER SLIPPER
Depth
A106110E01
16. INSPECT NO. 1 CHAIN VIBRATION DAMPER
Depth
A106111E01
17. INSPECT NO. 2 CHAIN VIBRATION DAMPER
Depth
A106112E01
(a) Check that the plunger moves smoothly.
(b) Measure the worn depth of the chain tensioner.
Maximum depth:
0.9 mm (0.035 in.)
If the depth is greater than the maximum, replace
the chain tensioner assembly.
(a) Measure the worn depth of the chain tensioner
slipper.
Maximum depth:
1.0 mm (0.039 in.)
If the depth is greater than the maximum, replace
the chain tensioner slipper.
(a) Measure the worn depth of the chain vibration
damper.
Maximum depth:
1.0 mm (0.039 in.)
If the depth is greater than the maximum, replace
the chain vibration damper.
(a) Measure the worn depth of the chain vibration
damper.
Maximum depth:
1.0 mm (0.039 in.)
If the depth is greater than the maximum, replace
the chain vibration damper.